Feeding Fondant!

Having given the bees all that sugar water back in September they really should still have plenty of stores. However, just to be on the safe side, we gave each a cake of fondant today. It’s there if they need it, and if they don’t, they’ll just leave it alone.

It was good to have a quick look through the polycarbonate crown board.  Caitlin in Hive 1, Rebecca in Hive 2, Sam in Hive 3 and Hope in Hive 5 were all busy just under the crown board. In fact, some of the bees from Hope decided to come out and see us off!

Claire in Hive 4 and Susan in Hive 6 had no bees in sight and this was the case the last time I had a peek in!  However, I had a good look down between the frames and I could see bees so they’re still in there!

Next visit will be to treat for Varroa in January or February.

Winter preparations.

We’ve spent the whole month of September feeding the bees. They’ve consumed 120kg of sugar, that’s 72 litres of sugar water. Thank goodness for Aldi, although it was starting to get slightly embarrassing buying 24 bags of sugar every week!

We’ve been battling the wasps all this month too. My homemade wasp traps were full after 2 weeks and we had to replace them with fresh traps, which are also now full. The hive porches definitely helped and, although there were still wasps about today, I’m hoping the numbers will start to diminish soon.

We ‘hefted’ the hives to see how heavy they were to judge the amount of winter stores. They were very heavy so we removed the feeders. We’ve left the smaller hives with a single brood. However, the larger ones have been left with a brood and a super (brood & a half) just to ensure they have enough stores for the winter. We’ve removed the queen excluders from between the brood & super so that the queen is free to move with the colony throughout the hive and stay warm. We also put in Apivar strips to medicate for Varroa, changed the crown boards to clear polycarbonate and put on insulation.

Once home, I cleaned all the removed equipment in a 1:5 solution of Soda Crystals and water and I will blow torch the equipment made from wood to ensure it’s sterilised before being stored for the winter.

The bees were out flying today in the beautiful warm October sun but they know winter is on it’s way!  Our final job will be to add the mouse guards once the wasps have gone and remove the Apivar strips in 6 weeks time. After that, the hives won’t be opened again until the spring.

Hope by name, Hope by nature!

We did a quick inspection today and our lovely friend Lynda joined us as a beekeeper apprentice. What a natural – well done Lynda!

The exciting news is that Hope in Hive 5 definitely has a laying queen. Although we still haven’t seen the Queen, there was a lovely brood pattern over several frames and the hive was healthy and mild.

Drones have been expelled and the supers are not being refilled so the bees are definitely feeling autumnal. Clearing boards were put on every hive to clear the bees from the empty supers and these will be removed in a few days. After that, we’ll start feeding sugar water so they have enough time to process it into stores for the winter.

As Autumn takes hold, the bees will reduce for winter and inspections will be fewer as the temperature drops. I’ll miss the buzz, excitement, stress and bewilderment but I’m absolutely thrilled to have 6 viable hives, particularly as 2 of these were made by splitting existing hives.

IMG_6820

 

Genetics!

We inspected the apiary today and all was well.  Caitlin in Hive 1, Rebecca in Hive 2, Sam in Hive 3, Claire in Hive 4 and Susan in Hive 6 were all doing well – eggs, larvae, brood, queens spotted and no sign of disease. Sam in Hive 3 and Claire in Hive 4 were particularly strong with brood over 7 or 8 frames, the other with brood over 3 to 4 frames.

It was interesting to watch Claire’s workers in Hive 4 throwing out the Drones. It’s the first time I’ve seen this happen. Three Drones were being thrown out so it must be getting to that time of year when the men are no longer required and therefore will no longer be tolerated in the hive – interesting!

I also witnessed a bee attacking a wasp that was trying to get into the hive. Fortunately, it was the only wasp about and I’m hoping that this year, I won’t have a wasp problem.

Hope in Hive 5, which you may remember was queenless, had some larvae!  Initially I was very excited – there must be a laying queen! However, in retrospect, I didn’t see the queen so I’m wondering if it’s a laying Queen or a laying Worker? At the next inspection I’ll need to see how good the brood pattern is and then I’ll hopefully be able to tell. I’m still hopeful for Hope!

The amazing thing is that the bees in the apiary are changing.  If I’ve understood the genetics then:

Rebecca in Hive 1 was my original hive that I brought through the winter – it had mongrel bees with a dark striped abdomen.

Caitlin in Hive 2, that I bought in April, also had mongrel bees with a dark striped abdomen.

Claire in Hive 4 and Susan in Hive 6, the two nucs I bought in May, had mild Buckfast bees with a golden orange colour abdomen.

So in June I had 4 hives – 50% with mongrel bees with a dark striped abdomen and 50% with Buckfast with a golden orange striped abdomen.

However, due to various manipulations and splits, Caitlin in Hive 1, Rebecca in Hive 2 and Hope in Hive 5 all now have queens which originated from Claire in Hive 4 – the mild mannered, beautiful golden orange coloured Buckfast bees. Even the Queens look similar – long and orange! Susan in Hive 6, although not the original Buckfast nuc queen, is derived from a queen cell from that queen. It is only Sam in Hive 3 which is from the original overwintered dark striped mongrel stock.

How interesting (or maybe it’s just me that thinks this?) – now I have 17% mongrel bees and 83% Buckfast bees!

As you’ll see from the photos, the majority have a golden orange striped abdomen but some still have a darker striped abdomen.

Holiday hope!

We weren’t sure what we’d fine at today’s inspection.

Before we went on holiday there were six hives, of which only two had queens. Three had nothing happening and one had multiple queen cells over various frames. We moved those frames with queen cell to the hives which had none in the hope that, while we were away, the queens would emerge, mate and start laying.

There was also the added complication of having to feed the bees before we went on holiday. The poor weather and a foraging gap, from the oil seed rape finishing and other stuff becoming available, meant that the bees were struggling for food. Four hives needed fed but I only had three feeders. Three hives were given sugar water and one was left with a cake of fondant. However, because the supers had to be removed to put the feeders on, this reduced the amount of space available should the weather and foraging improve. They couldn’t be left like that for the duration of our holiday so it was ‘call a friend’ time and fortunately, Sandy was only too happy to help. He put the supers on when the time was right.

So, did the feeding and all that queen cell swapping work?  Happily, we seem to have had some success!

Caitlin at hive 1 had a lovely new laying queen from the queen cell we added. The queen was spotted, there was larvae and eggs over 3 frames and plenty of stores.

Rebecca at hive 2, a queen was spotted, so the added queen cell worked, but there was no sign of eggs, larvae or capped brood. This could mean she’s not mated yet, not laying yet or the bad weather has prevented her from being mated and she’s now sterile. We’ll have to wait and see.

Sam at hive 3, again the queen was spotted and this was the original queen produced from the Snelgrove technique. It had 5 frames of brood and was very busy. We’d left them with a pack of fondant and it was all gone and had clearly done them well, as the hive was thriving.

Claire is hive 4 still had the lovely blue marked queen. That artificial swarm worked well.  It had 4 frames of brood and some stores.

Hope at hive 5 was the artificial swarm from Claire at hive 4 and it was the hive that all the frames with the queen cells came from. No queen was spotted and there was, AGAIN, another big capped queen cell. They must have swarmed again! This was the only hive that didn’t have a super on top so they must have felt they were low on space. We’ll just have to wait an see if the queen emerges and can get mated this late in the season. Hope is a good name for this hive!

Susan at hive 6, a queen was spotted, so the added queen cell worked, but no eggs, larvae or capped brood. It’s in a similar position as Rebecca in hive 2. There was lots of stores and we’ve just got to wait and see what happens.

We’ve now got five out of six hives with queens, three of which are laying, and one hive with a queen cell. I think we’ve come home to a more promising situation that when we left. I’m happy with that. Although, as is the nature of bees, it could be all changed by next week!

Bloomin Bees!

Today’s inspection did not reveal what we were expecting or hoping for!

The lovely new queen which arrived special delivery was nowhere to be seen in Hive Caitlin. There was no brood but lots of queen cells so I can only conclude that the hive didn’t accept her. It was worth a try. We’ll just have to see if any of the queen cells produce a viable queen. If not, I’ll merge with one of the other hives. It was a bit disappointing.

Hive Rebecca is a continuing mystery. There is now brood in the top brood box so a new queen has emerged and been mated – great news. I now need to work out how to move it to another site within the apiary. The bottom box has no brood but queen cells. The old queen must have swarmed so we’ll have to wait and see if a new queen emerges, mates and is viable. The Snelgrove technique hasn’t worked, probably due to my inexperience, and I’d be cautious to use it in the future.

We hadn’t ever fully inspected Hive Claire or Hive Susan because, as nucs and only with us for 4 weeks, they should only have been building up. However, on inspection today, we discovered they’ve built up so much that there were several capped queen cell in Hive Claire and several uncapped queen cells in Hive Susan! Fortunately I spotted the queens in both hives so I knew they hadn’t swarmed yet but they’re still getting ready!

I rushed home, got together the very last of my equipment and headed back to the apiary.  I felt Hive Claire was the more urgent, as it actually had capped queen cells, so I managed to artificially swarm it before the rain started. I moved the existing hive one meter to the right and I put a new empty hive on the original site. I found Queen Claire and put her in the new hive on the original site with one frame of stores and filled the rest with undrawn brood frames. The old hive, now one meter away, had all the flying bees, house bees, brood and capped queen cells but no queen. The theory is that the flying  bees will leave the old hive on the new site and return to the new hive on the old site after foraging. The new hive on the old site with the queen thinks it’s swarmed because there is a lovely empty hive and no brood. The old hive on the new site is full of house bees which will raise the brood and a new queen from the capped queen cells.

I’ll need to do the same with Hive Susan but the weather turned. I’ve got a little time on my side because they won’t swarm until they’ve capped a queen cell or until the weather gets better so fingers crossed I get back to them in time.

So I’ve used up all my equipment and I still have to work out what to do and where to put  the top brood box of Hive Rebecca. I’ll have to make another bee equipment order!

 

 

Special Delivery!

Having been concerned that Hive Caitlin’s inconsistent brood pattern was caused by either a failing queen or a laying worker, I decided to re-queen this hive.  The new queen arrived today by Royal Mail Special Delivery!

Stuart and I went through Hive Caitlin, found and killed the old queen and placed the new queen, still in her box, in the middle of the hive.  I felt bad killing the old queen but it’s quite common practice.  I had no idea how old she was so replacing her will provide the hive with a new, young queen with a tested laying pattern.  She is currently in a box plugged with fondant icing and some worker attendants.  The attendants will eat through the fondant and, by the time they have done that, the hive should be used to her pheromones and accept her as their queen.  Fingers crossed!

 

We then inspected Hive Rebecca.  Since the last post about the Snelgrove manipulation, there have been various doors opened and closed with the view to keeping the existing queen in the bottom box and creating a new queen in the top box.  Well, that was the plan! On today’s inspection there was a big, bold, capped queen cell in the bottom box.  This means the bottom box must have swarmed and left a new queen.  Precisely what the Snelgrove manipulation was supposed to stop!  So now I have to wait a minimum of 15 days to see if this queen emerges safely and gets mated.  The supers were looking pretty full, probably one of the reasons they swarmed, so we’ve put on a clearing board and will take one off tomorrow.

Meanwhile, the top box had 3 empty queen cells.  Hopefully a good sign that a queen has emerged and is on her mating flights.  There were no signs of eggs yet!

The nucs have now officially been named Hive Susan and Hive Claire.  We had a quick look in Hive Claire and they’re drawing out the last frames in the box.  We’re going to put some supers on tomorrow and give them more space.

As if that wasn’t enough, before all our own inspections, I helped Sandy hive a swarm he’d caught in North Berwick.  He wanted me to watch out for the queen – not a job I’m renowned for having success with but my eyesight is better than his!  However, I did spot her, on the hive roof of all places, but when I picked her up a gust of wind blew and I thought she’d taken flight – disaster.  But, when I turned by hand round, she was still on my glove so I carefully put her at the entrance and watched her walk in.  The rest of the bees followed.  Amazing to watch.

So that’s 3 queens I’ve seen today.  One arrived by Royal Mail Special Delivery, one was dispatched to queen heaven and one was helped into her new home at Sandy’s apiary.

 

Liquid gold

It’s happened!  We have spun, filtered and jarred our first honey!

We’ve been keeping an eye on Hive Caitlin’s super.  The combs have been filling up and, because I know the bees will have been on the local Oil Seed Rape (OSR), the combs needed to be removed quickly, before the honey is capped, so that it doesn’t set solid in the frames.

On Saturday we inserted a clearing board which has a one way valve.  The bees pass through this, down into the brood box, and cannot get back up to the super leaving it bee free.

On Sunday evening we returned to remove the super.  There were still a few bees in the super but we removed it from the hive and then brushed the remaining bees from the frames.

Sunday night we cut off any wax cappings, placed the frames in the spinner and spun!  The centrifugal force, forces the honey from the cells and after 3 rotations of the frames, all the honey was removed.

We then opened the valve and passed the honey through two sieves to remove any wax or debris, one coarse and one fine, and into the settling tank.  The settling tank was then left for 24hrs to allow air bubbles to escape and any remaining debris to float to the surface.

Last night, we opened the value of the settling tank, filled our sterilised jars and put our labels on.  It was a proud moment for us all to open our first jar of honey and have toast and honey for supper.

This batch wasn’t enormous so we’re going to keep some ourselves and give some to family.  Hopefully this is just the first batch and in a few months a sign can go in the window – honey for sale!